On Queue Computer

For sales or technical support call us at 978-499-0049 or toll free at 877-667-8383

On Queue Computer Inc. a leading remanufacturer of ABB / HP Legacy workstations unveils a new line of SSD Drives for HP/ABB operator stations

Newburyport MA, USA-January 8,2015 On Queue Computer Inc. a leading remanufacturer of ABB/HP Legacy workstations today unveiled a new line of SSD Drives for HP/ABB operator stations. Solid state drives (SSD) represent a new standard of storage for the ABB Advant station 500 series systems. Designed for speed and longevity these SSD Drives are ideal for commercial use in Chemical plants, Petrochemical (oil) refineries, Boiler controls and power plant systems, Nuclear power plants, Environmental control systems, Water management systems, Metallurgical process plants, Chemical plants, Pharmaceutical manufacturing, Sugar refining plants, and Dry cargo and bulk oil carrier ships.

The SSD drives are available with three different SCSI connector options - 50pin Ultra SCSI, 68pin Ultra160 SCSI, and 80pin Ultra160 SCSI. These drives are fully suited and compatible with a large range of workstations including HP 9000 712 series, 715 series, B132L, B180L, and all Visualize B, C and J series workstations.

Solid State Drives have a more robust operating temperature, speed, and life expectancy than conventional drives and are meant to replace older 2gb, 4gb, 9gb, 18gb, 36gb, 72gb, 146gb and 300gb SCSI spindled drives. If you need a larger capacity drive, we can support up to a 3 terabyte (3Tb) SSD Drive. Drives can be provided with a preloaded version of operating system needed for a bootable spare. SSD Drives are much faster at loading the ABB operating environment and the expected lifetime is 5 to 10 years.

Durable Local Storage

Unlike a Spindled HDD, the SSD has no moving parts, so it can withstand vibrations and a more hazardous operating environment than spindled drives. Users do not need to worry about the wear and tear on moving parts that can result in lost or corrupted data. It is shock resistant up to 1500G/0.5ms and will run in extreme temperature conditions so users can rest easy knowing the drive can withstand even the toughest elements.

Flash Type
SLC
43 n.m.
MLC
32 n.m.
Capacity
Support 48 bits addressing mode
1 GB ~ 32 GB
4 GB ~ 256 GB *
Read/Write (Max.) Performance
Read: 240 MB/s
Write: 180 MB/s
Read: 240 MB/s
Write: 220 MB/s
Electrical/Physical Interface
SATA 1.5G bps and 3G bps interface.
DDR I I/O interface
mobile-DDR I/O interface
Flash I/O
1.8 V and 3.3 V voltage level
1.8 V for ONFI Flash
DC 3.3 V for conventional Asynchronous Flash
Controller Features
SATA Revision 2.6 compliant.
SATA II
Compatible with SATA 1.5 Gbps and 3 Gbps interface.
Power management supported.
Support expanded register for SATA protocol 48 bits addressing mode.
Embedded BIST function of SATA PHY for low cost mass production.
NAND Flash Interface
Build-in hardware ECC circuit (48 bits/2 KB)
Support all types of SLC and MLC NAND Flash
ONFI 2.0 Interface support: 5 channels max, mode 2
Support 16 Flash chips enable
Bus width:
8/16 bits
DDR I interface
16 bits data bus
Data rates: 320 Mbps
Bandwidth: 640 MB/s
Support capacity: 32 and 64 MB
Mobile-DDR Interface
32 bit data bus
Data Rate: 320 Mbps
Bandwidth: 1,280 MB/s
Support Capacity: 32/64/128/256 MB
Built-in
Built-in 32 bits micro controller
Support
UART
Support 10 GPIO pins
Support TRIM command
Support SMART command
ECC scheme
Support 48/32/28 bits ECC correct per 2 KB data
Operation Temperature
Normal temperature series ? 0 ~ +70°C
Wide temperature series ? -40 ~ +70°C
Storage Temperature
Normal temperature series ? -40 ~ +85°C
Wide temperature series ? -40 ~ +85°C
Humidity
RH = 95% under 55°C
Shock#
1,500 G / 0.5 ms
Vibration#
20 G (80 ~ 2,000 Hz)
Acoustic
0 dB
Support
Support Hot-Swapping technique
Certificates Acquired
RoHS \ WHQL \ CE \ FCC
Remarks
*MLC and Ultra MLC products will be produced upon requested only.
# Subject to be changed without notice.

All solid state drives Come with a 1 year warranty

About On Queue computer Inc.

On Queue Computer is a global leader in legacy information technology, allowing users to run supportable high quality Remanufactured legacy systems with confidence. Through relentless innovation and discovery, we are transforming the Legacy Information Technology worlds with solutions that are cost affective sustainable and good for the environment.